UL 1333
Additional Details
APPLIANCE WIRING MATERIAL
Style 1333 Single conductor with extruded insulation
Rating 150 deg C, 300 Vac, Horizontal flame. Optional – 80 deg C Oil, Gasoline Resistant.
Conductor 30-10 AWG, solid or stranded, or Litz cable magnet wire, as describled below. Litz cable conductor consisists of single strand magnet wire, R/C (OBMV2) magnet wire rated a minimum of 150 deg C. Each single magnet wire strand is a conductor. AWG size to be determined by the DC Resistance Test per 1581.
Insulation Extruded FEP, 13 mils minimum average thickness, 12 mils minimum thickness at any point.
Covering Optional – Extruded FEP, 10 mils minimum thickness at any point, or glass braid, 7 mils minimum thickness any point.
Standard Appliance Wiring Material UL 758.
Marking General. Wires employing Litz conductors shall be plainly marked on the tag or reel as follows: “Litz conductors are manufactured using solderable magnet wire”.
Use Internal wiring of Appliances. In addition, the tag may also indicate 600 Volts Peak for electronic use only.
UL and the UL Logo are trademarks of UL LLC © 2014