Commercial (UL/CSA)

UL 2835

Additional Details

APPLIANCE WIRING MATERIAL
Style 2835 Multiple-Conductor Cable Using Extruded Non-Integral Jacket
Rating 60 deg C, 30 Vac, Cable flame for Use No. 1B and 2B, Horizontal flame for Use No. 1A and 2A.
Conductor 40 AWG minimum.
Insulated Conductor Material not specified for Use No. 1A or 1B. Labeled or complies with manufacturer’s Procedure for Use No. 2A or 2B.
Assembly Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Lay not specified. Barrier layer and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
Covering Optional. Extruded PVC, 5 mils minimum thickness at any point, over the assembly or groups of singles.
Shield Optional. May be over one or more of the insulated conductors or applied over the assembly.
Jacket Extruded PVC. If parallel construction is rippable, the measurements are made after ripping.
Diameter of cable under jacket* Minimum average thickness Minimum thickness at any point
0.250 inch or less (1A 2A only) 15 mils 13 mils
0.250 inch or less (1B 2B only) 30 mils 27 mils
0.251-0.424 inch 30 mils 27 mils
0.425-0.700 inch 60 mils 48 mils
0.701-1.500 inch 80 mils 64 mils
1.501-2.500 inch 110 mils 88 mils
2.501 inch or larger 140 mils 112 mils
* = Major diameter if flat or oval construction.
Standard Appliance Wiring Material UL 758.
Marking General.
Use Use No. 1A:, Internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors.; Use No. 1B:, CABLES – using 30 mils or greater jacket thickness only: External interconnection or internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors.; Use No. 2A:, Internal wiring in Class 2 circuits of electronic equipment where not routed along walls, floors, or other abuse areas.; Use No. 2B:, CABLES – using 30 mils or greater jacket thickness only: External interconnection or internal wiring in Class 2 circuits.
UL and the UL Logo are trademarks of UL LLC © 2014


If you don’t find what you’re looking for please contact us. The cable designs in this listing represent our standard product line. If you require special modifications or unique designs, SCC can create special cables for the most demanding applications. For custom applications please contact us.